How To Solve The Overheating Problem Of The Filter Press?

If the filter press is overheated, it will not only have a great impact on the operation of the staff, but also will have a certain influence on the filtrate during the operation, which will cause a change in the filtrate, and then affect the effect of separation, so in operation The process of overheating of the filter press should be noted. As a Filter Equipment Company, we have the following recommendations.

1. If the diaphragm filter press bearing is damaged, it should be replaced in time. When installing new bearings, it requires very strict standards. Be careful and careful.

2. Prevent the bearing from being subjected to severe impact and prevent the occurrence of scratches, indentations and cracks.

3. During the application of the Membrane Filter Press, it is necessary to pay attention to the anti-rust treatment of the bearings, and do not let the water get too much. Clean the periphery of the housing, apply lubricant, and maintain.